SPONSORED LINKS

What is right way to check transmission fluid on GMC Jimmy 1998

Tiny
ROYCAR71
  • MEMBER
  • 1998 GMC JIMMY
  • 6 CYL
  • AUTOMATIC
  • 198,000 MILES
I have recently changed my transmission fluid. I have heard conflicting answers on how to check transmission fluid. Some say have to have engine running, others say engined needs to be turn off and hot to get proper reading on dip stick. Which way is needed for a 1998 gmc jimmy. Thanks in advance.
SPONSORED LINKS
Thursday, September 1st, 2011 AT 9:46 PM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Start it up take it for a 10min ride -comeback leave the engine running -then check fluid level-if low fill it while engine is running till its level to full mark
Was this
answer
helpful?
Yes
No
Thursday, September 1st, 2011 AT 9:49 PM
Tiny
ROYCAR71
  • MEMBER
  • 354 POSTS
Advice taken, So far car picks up good no check engine light. Thanks.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:09 AM

Please login or register to post a reply.

Related Transmission Fluid Add Fluid Content

Transmission Fluid Check and Add - Automatic
GUIDE
Transmission Fluid Check and Add - Automatic
An automatic transmission or transaxle fluid dipstick handle is located toward the rear of the engine or near the transaxle. Checking and adding automatic transmissions ...
VIEW MORE

Sponsored links