What does btn fuse stand for.

Tiny
ROCKYDOG
  • MEMBER
  • 1998 FORD ESCORT
  • 15,000 MILES
Btn circuit is drawing voltage at all times killing battery
Tuesday, May 22nd, 2012 AT 6:16 PM

11 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
It says for the circuit for that fuse hazzard.
Was this
answer
helpful?
Yes
No
Tuesday, May 22nd, 2012 AT 6:33 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
I'm getting interior fuse panel power. It is 40 amps much more then hazard alone requires.
Was this
answer
helpful?
Yes
No
+2
Tuesday, May 22nd, 2012 AT 6:41 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Try pulling inside fuses 1 at a time to try an isolate cause.
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 22nd, 2012 AT 6:43 PM
Tiny
ROCKYDOG
  • MEMBER
  • 4 POSTS
Pulled btn fuse current draw gone / pull fuel injection fuse in same fuse panel current draw gone. What now
Was this
answer
helpful?
Yes
No
+5
Tuesday, May 22nd, 2012 AT 6:54 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Supposedly feeds interior fuses 2 6 12 13 7
Was this
answer
helpful?
Yes
No
Tuesday, May 22nd, 2012 AT 7:02 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Try disconnecting your alternator and see if light goes out.
Was this
answer
helpful?
Yes
No
-1
Tuesday, May 22nd, 2012 AT 7:03 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Have you modified/added to cars electrical system?
Was this
answer
helpful?
Yes
No
Tuesday, May 22nd, 2012 AT 7:03 PM
Tiny
ROCKYDOG
  • MEMBER
  • 4 POSTS
Nothing has been modified / but I did disconnect alternator / starter. Short is still there strong as ever. Also noticed the gounds are hot on motor as well as everything grounded is hot.
Was this
answer
helpful?
Yes
No
+1
Wednesday, May 23rd, 2012 AT 2:59 AM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
So when did this all start happening?
Was this
answer
helpful?
Yes
No
Wednesday, May 23rd, 2012 AT 8:19 PM
Tiny
ROCKYDOG
  • MEMBER
  • 4 POSTS
I dont know customer is very unsure of time frame. He had multiple problems when we recieved vehile most all have been corrected already. When we disconnect negative cable with continuity light we have a very bright light /draw / from cable to battery. Until we pull fuel injection fuse from outside fuse box in engine compartment it dims alittle and pulsates. Then we pull btn fuse in same box the lite is out. Sometimes we pull fuse inside car marked fi before we pull btn fuse it goes out. We have just about unplugged everything and draw is still there. When icheck ground on motor from negative cable everywhere I touch is lit / block / valve cover ect ect same issue almost like polarity has been reversed.
Was this
answer
helpful?
Yes
No
+1
Thursday, May 24th, 2012 AT 5:06 AM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Have you tried pulling relays?
Was this
answer
helpful?
Yes
No
-2
Wednesday, May 30th, 2012 AT 11:33 PM

Please login or register to post a reply.

Sponsored links