NO FLUID COMING OUT OF BLEEDER SCREW.
1997 Saturn SL2 • 20,600 miles
I replaced front and back rotors and brake pads, I used a C clamp to push the front calipers back in. And i had to twist the rear ones back in. I had no pedel after pumping several times, So when i tried to bleed them (started with the rear) No fluid came out of the bleeder screw, I tried for atleast 30 minutes, and i barely seen a bubble coming out.
May 28, 2012.
May 28, 2012.
I have the brake warning light ON on the dash, and the ABS light does not work at all, even when I switch to ignite. I also have noticed that the ABS is not working in hard braking.
12 answers • 1999 Jeep Grand Cherokee • 161,000 miles
I have a 1999 jimmy 4.3L 4x4. I had all the brakes and rotors replaced 4 months ago and now the ABS light comes on and activates at low speeds. Father in law driving it and went to park...
2 answers • 1999 GMC Jimmy • 110,000 miles
1994 Honda Civic EX w/ABS.After replacing brake pads, MC (bench bled) and Booster, brake pedal has good steady pressure until the engine is started, then pedal goes to the floor.Brakes ...
4 answers • 1994 Honda Civic • 250,000 miles
My 1997 Olds Cutlass Suprme with 4 wheel disc brake has the ABS light glowing. It makes a clicking noise when the brake is applied when the ABS light is out. Then the light glows and ...
2 answers • 1997 Oldsmobile Cutlass • 146,800 miles