HOW DO YOU ROUTE THE PCV HOSES ON A 5.0
1997 Mercury Mountaineer
Can someone show me the layout of the pcv system on a 1997 mercury mountaineer 5.0
Is this what you are looking for
Sorry sent you the wrong one. This one is for the Explorer and Mountaineer 5.0L
There are pcv hoses that come off the bottom of the intake from either side and there is a T that goes to the pcv and all the plastic fittings busted because the check ball got stuck in the top of the valve and oil sprayed the whole fire wall and brake master cylinder. I will try to make sense of this and get it together. Thank a lot for your time and help it is always appreciated.
I have looked around and don't have any other diagrams. What you can do is go to the parts department and they can print you out the parts listing and many times you can tell by that how they hook up. Hope that helps.
Took 99 Mer Sab in for trans repair. When pick up had no brakes (went totally to floor and no air...
1 answer • 1999 Mercury Sable
Brake needs to be pumped to work. Is this due to worn seals in the brake master cylinder, or ...
1 answer • 1999 Ford Escort • 149,000 miles
Replaced master cylinder & booster both front calipers & rotors & rear wheel cylinders on 1997 f350 ...
1 answer • 1997 Ford F-350
1995 Chevy Beretta mileage: 88,000. I need to rebuild the brake master cylinder. The car has anti ...
1 answer • 1995 Chevrolet Beretta • 88,000 miles