Cranks but wont start

Tiny
RANDYB
  • MEMBER
  • 1997 MERCURY MOUNTAINEER
  • V8
I own a 1997 mercury mountaineer a while back a friend tried to jump start it and arc'd it blew the fuse for fuel pump, I replaced fuse and now when I crank the key I hear the relay. But I get no fuel to fuel rail, new fuel filter, and the inertia switch is not tripped, other than fuel pmp what else might cause this?
Do you
have the same problem?
Yes
No
Tuesday, April 19th, 2011 AT 11:04 PM

4 Replies

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Check all fuses and links
With key on you should have check engine light on if not recheck relays and fuses
Check for power and good ground at the fuel pump module with key on and or when cranking
If have both pump need to be replaced
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 19th, 2011 AT 11:14 PM
Tiny
RANDYB
  • MEMBER
  • 4 POSTS
Where is the fuel pmp module located at.I have no owners manual
Was this
answer
helpful?
Yes
No
+2
Tuesday, April 19th, 2011 AT 11:21 PM
Tiny
RANDYB
  • MEMBER
  • 4 POSTS
Where is fuel pmp module located
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 19th, 2011 AT 11:22 PM
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Fuel Pump is in the fuel tank
Fuel Pump Relay Mounted in power distribution box, at right fender apron
Was this
answer
helpful?
Yes
No
+1
Wednesday, April 20th, 2011 AT 12:43 AM

Please login or register to post a reply.

Sponsored links