SPONSORED LINKS

What is the size wrench needed to remove the pully from the altenator

Tiny
INTREPIDALTENATOR
  • MEMBER
  • 1997 CHRYSLER INTREPID
  • 229,879 MILES
I need the size of the nut on the pully so I can buy the correct size wrenchs this is of vital importance because I need my car to continue working at my job and it is currently broken down
Wednesday, September 28th, 2011 AT 10:01 PM

12 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
15/16 socket

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:09 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
So a 24mm socket is correct? And also do I need anything else to remove the pully because I am trying to switch the pully onto my new altenator I got also how do I lock the pully so I can remove it with out it spinning I do not have a vise is there a way to do it with out one?
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:12 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Not sure of the mm crossover. Once the nut is released, it just comes off. Easy change

Roy
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:25 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
Okay thank you very much Roy one last qeustion is there a way to lock the pully in place while I am trying to release the nut?
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:27 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
I use a pair of channell log pliers.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:33 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
Is there a way to do it with out the pliars? If there isnt how much do they cost?
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:35 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
You can use a rag and hold it but we do that if we have an air gun. If not, get the pliers, they are cheap enough, about 20-25

Roy
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:39 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
Can you purchase them at canadian tire?
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:41 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Cant answer that, give them a call.

Roy
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:42 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
Thank you roy I will
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:45 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good luck
Was this
answer
helpful?
Yes
No
Wednesday, September 28th, 2011 AT 10:56 PM
Tiny
INTREPIDALTENATOR
  • MEMBER
  • 11 POSTS
Hi roy I have another qeustion about the intrepid? I need to know what size bolts to get to replace a broken one in my hub like what would I ask for when ordering the parts
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 1st, 2011 AT 10:59 PM

Please login or register to post a reply.

Related Alternator Replace/Remove Content

Sponsored links