1996 ECLIPS WONT START

1996 MITSUBISHI ECLIPSE
80,000 MILES
Avatar
RICK MASTEN
  • MEMBER
  • 3 POSTS
I HAVE REPLACED CAM SENOR,CRANK SENSOR, COIL PACK, ECM AND I STILL HAVE NO SPARK
Jan 14, 2012 at 5:04 AM
Advertisement
Avatar
PROAUTOTECH
  • CAR REPAIR CONTRIBUTOR
  • 288 POSTS
check the plugs going to all of these parts, particularly the coils. If the coil pack burned up for whatever reson possibly the plugs or wires did as well. Also check all the fuses, ignition mainly. If they check out, see that the coil pack is getting 12V. If not, try hot wiring it with a jumper to see if you can get spark. If you get it, you can then rule out some components, and possibly look for a problem in the ignition switch maybe.
Jan 14, 2012 at 5:17 AM
Avatar
KHLOW2008
  • CAR REPAIR CONTRIBUTOR
  • 41,814 POSTS
Did you check if the timing belt is bad?
Jan 14, 2012 at 10:25 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.