96 ford ranger 3.0 dies after it started and turns over but wont fire ,has got spark
Mar 19, 2011 at 12:46 AM
car stalls
1996 FORD RANGER
MAINST
- MEMBER
- 2 POSTS
- FOLLOW
Advertisement
Sounds like fuel related problem-
Do you hear the fuel pump come On when you turn key on? If not check fuel pump fuse and fuel pump relay if okay-check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light.
Do you hear the fuel pump come On when you turn key on? If not check fuel pump fuse and fuel pump relay if okay-check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light.
Mar 19, 2011 at 12:52 AM
Thank you for your quick response-when I turn the key to the on position I only hear a slight click and the nothing. This happened after starting the truck and moving up the drive ,I stopped and it died .Could a crankshaft sensor be a possibility .
Mar 19, 2011 at 1:41 AM
If there's a problem with the CPS I don't think it will start-this one here tells the computer to fire the coils
Problem here could be also the ignition switch for the ( when I turn the key to the on position I only hear a slight click and the nothing ).
Problem here could be also the ignition switch for the ( when I turn the key to the on position I only hear a slight click and the nothing ).
Mar 19, 2011 at 1:49 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.