1996 Ford Escort • 4 cylinder 2WD Manual •
We have a 96 ford escort 1.9 sohc I was tiring to replace transmission fluid when I took the speed sensor out it broke it to 3 pieces plug in part and that stick come out but the metal ring and the gear stayed in then when I grabbed that metal ring to pull it out it broke and I tried again and it broke too. So theres like a half of metal ring and the gear still in the trans. And idea on what I should do now?
June 20, 2011.
June 20, 2011.
Check out the related content below while we wait for the question to be answered by a professional mechanic.
Just wondering what sensors i need to replace.codes as follows.p0135,p0155,p0133.two of the codes say bank 1 sensor 1 the other says bank2 sensor 1.I think bank means driver or ...
2 answers • 2002 Dodge Intrepid • 100,500 miles
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles
Describe the type sensor of the Knock sensor is on this vehicle and how it should be tested.?
1 answer • 2002 Chrysler 300 • 100 miles