1996 Chevrolet Blazer Having Electrical Issues Eng Fuse Keeps Blowing This Happe

1996 CHEVROLET BLAZER
150,000 MILES
Avatar
TOPHDADDY
  • MEMBER
  • 3 POSTS
I just finished changing out my transmission. I started it up and it began to blow the fuse. I don't know what would cause this. Engine will not run properly with out this fuse.
Jul 12, 2012 at 2:01 PM
Advertisement
Avatar
DOCFIXIT
  • CAR REPAIR CONTRIBUTOR
  • 18,828 POSTS
4.3L? does fuse blow sec. key is turned to start? if yes several things feed by that fuse check work see if wire got pinched possibly between trans and engine
Jul 12, 2012 at 2:19 PM
Avatar
TOPHDADDY
  • MEMBER
  • 3 POSTS
Yeah it is a 4.3 and I checked all of wire running to the trans and we made sure the hot wire running to the starter wasn't grounded out and didn't help. Fuse does blow as I turn the key on
Jul 12, 2012 at 10:26 PM
Avatar
DOCFIXIT
  • CAR REPAIR CONTRIBUTOR
  • 18,828 POSTS
Check all O2 sensor wiring look for pinched or damaged wiring
Jul 13, 2012 at 3:12 PM
Avatar
TOPHDADDY
  • MEMBER
  • 3 POSTS
Thanks for the advice. It was the o2 sensor itself shorting out. Got it fixed and runs great.
Jul 23, 2012 at 2:31 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.