fuel filter you may need a specialt tool to get it off, insert the tool and disconnect the line on both ends. releive fuel pressure from schrader valve first though. what engine do you have?

Answered by hmac300 (expert)
17,714 answers provided

2.5l tl

Response from moneysam
49 questions asked

they really don't give instructions for valve cover, but take off the 3 bolts that are in the arrows then the cover should come up. you'll need to move all lines as well asbracketry first though if any in theway remove teh old gasket and scrape areas clean install new gasket use 3m 8001 (yellow) cement if need to hold gasket in place and tighten bolts to 106 inchpounds.

Answered by hmac300 (expert)
17,714 answers provided

Do u hav a diagram of fuel filter location

Response from moneysam
49 questions asked

It is bolted to the firewall and if you follow the fuel line from the fuel rail, you should be able to see it.

Answered by KHLow2008 (expert)
39,792 answers provided

Sorry i got the year wrong its a 99 acura tl 2.5

Response from moneysam
49 questions asked

So i really need the info for that yr

Response from moneysam
49 questions asked

They are similar so the information applies.

Answered by KHLow2008 (expert)
39,792 answers provided

Ok thanks

Response from moneysam
49 questions asked

You're welcome.

Answered by KHLow2008 (expert)
39,792 answers provided