SPONSORED LINKS

Where is the location of the PCV valve, EVAP.

Tiny
GHAWK122
  • MEMBER
  • 1994 MITSUBISHI MIGHTY MAX
  • 25,000 MILES
Where is the location of the PCV valve, EVAP canister, oxygen sencor and the EGR valve on a 2.4?
Saturday, March 2nd, 2013 AT 9:47 AM

4 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Pcv is on the valve cover. Hose goes to the intake manifold

evap cannister is down by the fuel tank. It contains valves and solenoids.

Egr is on the back of the motor. It connects to the exhaust and intake systems.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, March 2nd, 2013 AT 2:11 PM
Tiny
GHAWK122
  • MEMBER
  • 5 POSTS
Thank you very much. I don't know much about these 4 cylinder engines. I grew up on chev. Small blocks. Them I can work. Also is that oxygen sencor in the cannister are by the EGR?

Thank you again for your help
Guess I need to get a manual.
Gary
Was this
answer
helpful?
Yes
No
Saturday, March 2nd, 2013 AT 10:10 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
O2 sensor is in the exhaust pipe. Look for a sensor screwed into the exhaust by the manifold or down a little

Roy
Was this
answer
helpful?
Yes
No
Saturday, March 2nd, 2013 AT 10:54 PM
Tiny
GHAWK122
  • MEMBER
  • 5 POSTS
Thank you again. Found everything just where you said. You have been very helpful to this old man. Hope you have a nice evening.
Was this
answer
helpful?
Yes
No
Sunday, March 3rd, 2013 AT 12:28 AM

Please login or register to post a reply.

Sponsored links