MAZDA B4000 TRANSFER CASE PROBLEM
1994 Mazda b4000 • 250,000 miles
Electric motor on transfer case has been replaced after I was manually selecting 2 wheel to 4 wheel position. Replaced motor with both motor and transfer case selector pin in 2 high position. Now when I press the 4 wheel drive in 4 wheel position all lights work properly and I hear transfer case shifting into 4 high position or whichever position I select. Truck stays in 2 high position, short of removing the motor and checking the selector pin, everything seems to be working in the transfer case. Could it be that the transfer case selector pin previously been moved that now it may need to be re-calibrated?
December 3, 2012.
December 3, 2012.
Check out the related content below while we wait for the question to be answered by a professional mechanic.
My Transfer Case has a bad oil pump, in it, and the truck itself won't shift when driving in 2 wheel drive, but when I put it in 4 Low it will shift up to 3rd gear. It will not shift ...
1 answer • 1993 Ford F-150 • 150,000 miles
My 97 ford explorer 5 sped manual trans 4x4 part time has a bad transfer case. The one I that it currently has on it ends in 195ga. I was able to get a case ending in CA. it has a 4 ...
1 answer • 1997 Ford Explorer • 174 miles
Enter your question...I have a 2003 Dodge Ram 1500 4x4. I have a few concerns about it. I think either the transfer case or something is going out. I was driving it in 4Low and every ...
2 answers • 2003 Dodge Ram • 147,000 miles
2 questions; Both on a cadillac escalade transfer case with full time all wheel drive; I drained & refilled it with the blue ''auto track II'' gm stuff that my gmc truck takes, then ...
3 answers • 2002 Cadillac Escalade • 150,000 miles