SPONSORED LINKS

1994 Isuzu Rodeo transmission

Tiny
ADJONES
  • MEMBER
  • 1994 ISUZU RODEO
  • 3.2L
  • V6
  • 2WD
  • MANUAL
  • 160,000 MILES
My standard will not go into 1st gear. But goes in to all others. But when in reverse it wont move and the engine dies. What could be going on.
Monday, November 16th, 2015 AT 9:36 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check shifter to see if cogs are lining up right it may be jammed between two gears. Otherwise it may be an internal thing like a synchro bad for first or shift fork for reverse and not letting it go all the way in gear.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 16th, 2015 AT 10:50 AM
Tiny
ADJONES
  • MEMBER
  • 1 POST
Thank you so much for your quick response but what are cogs? And how do I check them
Was this
answer
helpful?
Yes
No
Monday, November 16th, 2015 AT 11:07 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
That is where the shifter goes in to trans see if they look like a square or rectangle in neutral they should they shouldn't be worn either or where the end of shifter is should be square like and rounded.
Was this
answer
helpful?
Yes
No
Monday, November 16th, 2015 AT 5:14 PM

Please login or register to post a reply.

Related Transmission Engage Content

VIEW MORE

Sponsored links