Rumbling noise when standing still with brakes depressed and car in drive

Tiny
SMSJAZZ81
  • MEMBER
  • 1994 GEO PRIZM
  • 122 MILES
I have a rumbling noise that happens whenever I apply the brakes and come to a stop. It makes the noise when the car is in gear but stop if I put the car into neutral. The steering wheel also vibrates which I'm sure is an unrelated problem but I though was worth mentioning.

I put new brakes pads and rotors on the car 5/1/12

Thanks,
smsjazz81
Do you
have the same problem?
Yes
No
Thursday, May 3rd, 2012 AT 10:58 PM

11 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Have you checked all the engine and transmission mounts?
Was this
answer
helpful?
Yes
No
Thursday, May 3rd, 2012 AT 11:34 PM
Tiny
SMSJAZZ81
  • MEMBER
  • 5 POSTS
No I haven't where are they located, how many are there and how do you tell if they're are bad?
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 12:49 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Do you have the 1.6 or 1.8L engine?
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 12:55 AM
Tiny
DJCL
  • MECHANIC
  • 767 POSTS
There are at least 4 mounts thay are rubber and metal used to isolate engine vibrations. Thay some times will brake or get week and mis align the engine and alow parts of the engine and or transmission to be in contact with the body of the car. To check them you would start with a visual check and then pry on them with a large bar checking for excessive movement.
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 12:59 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You have a front transmission mount rear transmission mount a front right one up by the cylinder head by the timing cover and a lower engine mount.
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 1:07 AM
Tiny
SMSJAZZ81
  • MEMBER
  • 5 POSTS
94 geo prizm LSI 1.6L
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 1:32 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
The mounts are still in the same place for that engine as well.
Was this
answer
helpful?
Yes
No
Friday, May 4th, 2012 AT 1:34 AM
Tiny
SMSJAZZ81
  • MEMBER
  • 5 POSTS
I plan on replacing all engine/transmission mounts today. Wish me luck.
Was this
answer
helpful?
Yes
No
Saturday, May 5th, 2012 AT 12:54 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Good luck did you find some bad ones?
Was this
answer
helpful?
Yes
No
Saturday, May 5th, 2012 AT 9:29 PM
Tiny
SMSJAZZ81
  • MEMBER
  • 5 POSTS
They were moving a bit except for one and the rubber pieces were all dry and cracking I got 2 done today and am doing the others tommorow.
Was this
answer
helpful?
Yes
No
Saturday, May 5th, 2012 AT 11:07 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Let me know hownit comes out.
Was this
answer
helpful?
Yes
No
Saturday, May 5th, 2012 AT 11:11 PM

Please login or register to post a reply.

Sponsored links