SPONSORED LINKS

No low end powe

Tiny
PRADESI
  • MEMBER
  • 1994 CHEVROLET CAMARO
  • 165,000 MILES
1994 Z28. 5.7. No low end power, after RPMs get up then has good power. Replaced plugs and wires, opti and timing chain, has 44lbs fuel pressure, replaced map and mat. Still no low end power. Pete
Wednesday, February 29th, 2012 AT 11:48 PM

10 Replies

Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Sounds like timing problem.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 12:21 AM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
Checked timing 3times. Unless. I'm missing something. Thanks
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 7:40 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
I also mean timing as in advance? And what about cam condition? Highly worn? Was it running fine before all the work was done?
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 8:42 PM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
Timing in advance I'm familiar with that on regular distributors but not opti. Car was not running before all the work was done. Pulled it out to wash one day running great next thing I know it wouldn't start, so I replaced opti and timing chain and check timing. Changed plugs and wires, map and mat. Thanks pete
Was this
answer
helpful?
Yes
No
Thursday, March 1st, 2012 AT 9:15 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Shoulda came here first before the BIG work you did. So many waste time and money and dont fix it or make it worse. Then seek help. I generally wont touch a car that someone has messed with indiscriminately as it just complicates things.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 2nd, 2012 AT 12:02 AM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
So in other words you have no idea what's wrong. I just come on here for help not here some self centrrd.
Was this
answer
helpful?
Yes
No
Friday, March 2nd, 2012 AT 12:27 AM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
No whining. No I dont since I just dont work on THOSE everyday. Others can jump in here and add info if they like. Hasn't happened yet so just wait or go over your work again. Remember this is FREE so you get what you get and your input/help is a consideration.
Was this
answer
helpful?
Yes
No
Friday, March 2nd, 2012 AT 3:03 AM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
Thank you very much, your help so far is greatly appreciated. Thanks again.
Was this
answer
helpful?
Yes
No
Friday, March 2nd, 2012 AT 1:34 PM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
Knock sensor was bad
Was this
answer
helpful?
Yes
No
Wednesday, March 7th, 2012 AT 11:11 PM
Tiny
PRADESI
  • MEMBER
  • 12 POSTS
Knock sensor and water pump sensor were bad replaced and runs great now. Thanks. Pete
Was this
answer
helpful?
Yes
No
Wednesday, March 7th, 2012 AT 11:14 PM

Please login or register to post a reply.

Related Timing Chain Replace/Remove Content

VIEW MORE

Sponsored links