Removal
Obtain radio security code. Turn ignition off and wait for 20 seconds. Disconnect negative battery cable. Drain cooling system. Disconnect front exhaust pipe from catalytic converter.
Install 8.0 mm bolt in belt tensioner hole and remove drive belt. See Fig. 3. Remove ignition cable guide. Disconnect front and rear motor mounts. Attach Engine Sling (2024A) to engine. See Fig. 4.
Lift engine enough to access water pump. Secure pulley using Spanner Wrench (VAG 1590). Remove water pump bolts. Push engine toward left side and remove
Images (Click to make bigger)
SPONSORED LINKS
Thursday, August 18th, 2011 AT 2:50 PM
