SPONSORED LINKS

Which component is being moved when tensioning the drive belt on Plymouth Sundance

Tiny
HUNTERRM71
  • MEMBER
  • 1993 PLYMOUTH SUNDANCE
  • 110,000 MILES
I am trying to add tension to the alternator belt. When I turn the tension screw nothing happens. Do I need to pry the component, and what is the component that should be moving. I have loosened all necessary bolts, still no movement or tightening is being noticed.
SPONSORED LINKS
Saturday, January 21st, 2012 AT 6:06 AM

5 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,727 POSTS
Which engine do you have?
Was this
answer
helpful?
Yes
No
Saturday, January 21st, 2012 AT 6:15 AM
Tiny
HUNTERRM71
  • MEMBER
  • 3 POSTS
I have a 4cl. 2.2l
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 21st, 2012 AT 5:05 PM
Tiny
HUNTERRM71
  • MEMBER
  • 3 POSTS
I have a 4cl 2.2l engine
Was this
answer
helpful?
Yes
No
Saturday, January 21st, 2012 AT 5:06 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,727 POSTS
First you have to loosen the lock nut in the middle of the 3" round disc under the alternator, then turn the adjusting bolt clockwise. It is below and in front of the alternator. That bolt will pull the up. You'll need a swivel socket to get on that bolt.
Was this
answer
helpful?
Yes
No
Saturday, January 21st, 2012 AT 5:29 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,727 POSTS
Should have read, "the bolt will pull the alternator up".
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 22nd, 2012 AT 9:01 AM

Please login or register to post a reply.

Related Serpentine Belt Tensioner Bolt Content

VIEW MORE

Sponsored links