1993 Mazda MX6 Repair Question
Asked on August 1, 2012
Cause of VRIS #1 and all four O2 sensers to show up on diagnostic
Did have a broken air intake hose, which I replaced, then reset diagnostics.
Answer
Replied on August 1, 2012
What would cause VRIS #1 and all four O2 sensors to show up on diagnostic report?
Replied on August 1, 2012
a bad battery for one. what is the specific codes
Replied on August 2, 2012
Before I changed the hose the codes were 15,17,23,24,& 41. Now they are 17, 23, & 41.
The battery is 09'.
Replied on August 2, 2012
have the battery check for voltage drop as well as condition. if it erasds 12.4 with a vom it's probablby not that good. check your fuel pressure 30-36 psi with vacuum hose disconnected at pressure regulator. you have to check for poor conections at O2 sensors, or a bad injector or cloggedfuel return line to tank.you shold really have a pro look at this as this can be multile things. Also next time send data of engine size which you didn't