SPONSORED LINKS

1992 Suzuki Vitara repair

Tiny
YOHANNES ENDALE
  • MEMBER
  • 1992 SUZUKI VITARA
  • 1.6L
  • 4 CYL
  • 4WD
  • MANUAL
  • 300,000 MILES
I rebuilt z engine about 1 month ago.I replace cilinder liner, valve guide, valve steam seals, & gascats.Z problem is when I start z engine blue smoke gos out after z engine warm up it gos.
Thursday, October 15th, 2015 AT 7:53 AM

3 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
This is a very typical indication of a problem with either stem seals or valve guides, did you do this yourself or was it done by a head repair business?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 15th, 2015 AT 1:39 PM
Tiny
YOHANNES ENDALE
  • MEMBER
  • 2 POSTS
No. Rebuilt@ suzuki garage
Was this
answer
helpful?
Yes
No
Thursday, October 15th, 2015 AT 8:06 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Take it back to them and explain that it is burning oil and you need them to investigate why, tell them that you have been advised that this oil burning on start up is consistent with valve stem seals and or guides.
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2015 AT 12:20 AM

Please login or register to post a reply.

Related Blue Smoke Content

Blue Smoke
GUIDE
Blue Smoke
When a car is producing blue smoke it means oil is getting into the combustion chamber for one reason or another and being burnt along with the normal gasoline. This creates...

Sponsored links