SPONSORED LINKS

When put in gear its clanking noise not high.

Tiny
ANONYMOUS
  • MEMBER
  • 1992 PONTIAC SUNBIRD
  • 345,000 MILES
When put in gear its clanking noise not high pithched whine like tranny wont move in any gear its like its in neutral and just clanking I think its driveshaft or boot
Monday, February 11th, 2013 AT 8:09 PM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,737 POSTS
A cv joint boot won't cause that but a broken joint will. Check the outer cv joints to see if one is broken and check the inners to see if one pulled out of the transmission. If an inner pulled out, the most likely cause is a broken spring inside it. A suspension problem like a broken ball joint will let the bottom of the wheel squirt out and that will pull the half shaft out of the transmission too.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, February 11th, 2013 AT 8:13 PM

Please login or register to post a reply.

Related Drive Shaft Noise Content

Sponsored links