NIAGRA FALLS KIND OF A LEAK
1991 Geo Metro • 93,000 miles
Now i need answers. Badly. Not to be rude but im all out of ideas at this point. My first question on here was whether i should replace the pipe or the engine. Got an answer. So i replaced the pipe. That didnt work. turns out that the threads that the pipe screws into on the intake are all gone. It is completely smooth except for the very back where i believe there are three threads left. I put a thread sealer on the pipe and screwed it back in as far as it will go. Tested it out today and found out that the leak is much worse than before. What did i do wrong and what do i do to fix it? I'm at the end of my rope here so i desperately need answers. Please.
U say screws are stipped. how many hold this pipe on and im guessing u are leaking coolant.u maybe able to use a tap and die set to rethread the holes.if not u will have to replace the intake manifold not the whole engine.
August 30, 2012.
August 30, 2012.
First, the pipe itself screws into the intake. second, im trying out a sealant and sealing the hole thing to see if that works. third, if it doesnt work, where do i find an intake manifold for my car?
I Have a Suzuki Sidekick 1992 JX 4 door I am looking to get a new engine I was looking at used ...
1 answer • 1992 Suzuki Sidekick • 150,000 miles
We have a 2000 Elantra GLS (auto) and have owned it since it had fewer than 10,000 miles on it. It ...
1 answer • 2000 Hyundai Elantra • 13,000 miles
1990 Toyota Camry mileage: 150,000. 1. The oil warning light is on. 2. There are four quarts of oil ...
1 answer • 1990 Toyota Camry • 150,000 miles
1970 Volkswagen van 1600cc mileage: 600. Hi and thanks in advance for your site. We have been ...
1 answer • 1970 Volkswagen Van • 6,000 miles