SPONSORED LINKS

1991 Chevrolet Camaro Hard start

Tiny
ANDRE2788
  • MEMBER
  • 1991 CHEVROLET CAMARO
  • 5.0L
  • V8
  • RWD
  • AUTOMATIC
  • 80,000 MILES
Hello,

I have a problem with starting this camaro. I have to hold or press the gas pedal to get it to start. I replaced the iac valve twice. I tried to reset the iac valve and it worked the first time. After I turn the car off and try to restart, it doesn't start. I cleaned the the iac passage. Have good fuel pressure.
iac valve test:
A (.4 volts
B (11.4 volts
C (.4 volts
D ( 11.4 volts
SPONSORED LINKS
Friday, December 26th, 2014 AT 6:03 PM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Have you checked the coolant temp sensor yet?
Was this
answer
helpful?
Yes
No
Friday, December 26th, 2014 AT 10:34 PM
Tiny
ANDRE2788
  • MEMBER
  • 3 POSTS
I replaced it last year thinking it was the problem. Same thing happened. I'm stumped. Parts I replaced in the past year ( temp sensor, map, tps, egr, fuel pump, fuel filter, plugs and wires, coil, cap and rotor, pick up, pressure reg. The car is my project car so was replacing these items anyway.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, December 27th, 2014 AT 7:26 AM
Tiny
ANDRE2788
  • MEMBER
  • 3 POSTS
Forgot to add that when the key is turned the pintle of the iac valve is fully extended. Blocking the port. It never moves in. The only time it will move in is when the computer is in diag. Mode. Then the engine starts in high idle then gradually extends and the idle goes down.
Was this
answer
helpful?
Yes
No
Saturday, December 27th, 2014 AT 8:35 AM

Please login or register to post a reply.

Related Engine Hard To Start Content

Hard Starting
GUIDE
Hard Starting
Popular Hard Starting Causes
VIEW MORE

Sponsored links