91 Buick Park Avenue

TONY SEGAR

MEMBER
1991 BUICK PARK AVENUE

What tools do I need to replace a s-belt on a 91 buick park ave

Friday, December 31st, 2010 AT 2:12 AM

1 Reply

HMAC300

MECHANIC
48,601 POSTS

You will need a 13/15 or 18 mm wrench to release the tension on the tensioner. Then pull the belt off. A tensioner diagram is online here under diy or repair. Look under belt routing.

Please login or register to post a reply.

Car Shakes

I Have 91 Buick Park Ave 3.8litre And I Just Replaced The Balancing Pulley, Alternator And Plugs With Wires Gaped Correctly. My Problem Is...

Asked by shaunborboa ·

2 ANSWERS

1991

BUICK PARK AVENUE

VIDEO

How to Use a Torque Wrench

Instructional repair video

Thinking Of Buying

Are There Any Engine Problems I Should Look For That Are Common In The Ultra Model. And Any Thing Else Inherent Of This Car.

Asked by weldertrub ·

6 ANSWERS

1999

BUICK PARK AVENUE

1996 Buick Park Avenue Fuse

The Fuse For Fuel Injectors Will Blow When Going Down Road Or Setting With Mortor Running.

Asked by junior wilcox ·

1 ANSWER

1996

BUICK PARK AVENUE

2001 Buick Park Avenue Fuse Blows

When I Turn My Ignition Switch To On A Fuse Blows Under Glove Box. Fuel Pump Has Been Replace So That's Not It. Car Turns Over Fine But Want...

Asked by rsandifer ·

5 ANSWERS

2001

BUICK PARK AVENUE

1996 Buick Park Avenue Blown Fuse

Fuse Block Behind Glove Box Blows Fuse For A/c (hence Blowing Warm Air) And Check Engine Oil Light Comes On, But Oil Level Is Fine. Thought...

Asked by sirronh ·

4 ANSWERS

1996

BUICK PARK AVENUE

91 Buick Park Avenue

1 Reply

Please login or register to post a reply.

Related Tool Content

Car Shakes

Thinking Of Buying

1996 Buick Park Avenue Fuse

2001 Buick Park Avenue Fuse Blows

1996 Buick Park Avenue Blown Fuse

Sponsored links