1990 Chevrolet Truck back drum brakes

Tiny
PHILLIP J PORRAS
  • MEMBER
  • 1990 CHEVROLET TRUCK
  • 5.7L
  • V8
  • 2WD
  • AUTOMATIC
  • 77,000 MILES
My front brakes have fluid and can be bled but when I tried to bleed the back drum brakes I have no fluid. Master cylinder, proportioning valve has been replaced, both wheel cylinder. Still no fluid.
Do you
have the same problem?
Yes
No
Monday, July 20th, 2015 AT 10:21 AM

3 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,699 POSTS
Do you have the truck supported on jack stands under the frame? If so, you likely have a height-sensing proportioning valve at the rear axle that is limiting fluid flow. Support the truck by the rear axle so the body sits lower on the frame.
Was this
answer
helpful?
Yes
No
Monday, July 20th, 2015 AT 8:09 PM
Tiny
PHILLIP J PORRAS
  • MEMBER
  • 1 POST
Yes.
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2015 AT 8:39 AM
Tiny
CARADIODOC
  • MECHANIC
  • 33,699 POSTS
Yes, what? It's on jack stands under the frame or moving them to the axle solved the problem?
Was this
answer
helpful?
Yes
No
Tuesday, July 21st, 2015 AT 6:23 PM

Please login or register to post a reply.

Sponsored links