OLDSMOBILE CUTLASS ENGINE PROBLEM
1989 Oldsmobile Cutlass • 100,000 miles
My 1989 cutlass ciera has 100000 miles on it. I have been trying to figure out why the engine wont turn over. For awhile I have had to repeated press on the gas but then noticed the gas pressure being slowly decreased over time. Just yesterday I have zero pressure in the clutch and the engine wont turn over at all. I thought it might have just been brake fluid which would mean no hydraulic pressure, but after checking it, the reservoir is full. My next thing to look at is either the flywheel or see if there is a clutch cable. I haven't really been able to look too much so it is something I am unsure of. The main thing I notices with the service engine light is when I lifted my foot off the gas it would come on so I know it is a pressure issue. I am stumped as to what to look for now.
December 31, 2012.
December 31, 2012.
Check out the related content below while we wait for the question to be answered by a professional mechanic.
1986 Nissan Stanza, California version. The engine wants to die when stopping. I thought that the lock-up switch for the torque converter was not unlocking. I have installed a used ...
2 answers • 1986 Nissan Sunny • 100,000 miles
1999 Hyundai Elantra mileage: 110,000. This car idles fairly well in neutral or park but very rough in reverse and drive. I just replaced the engine with a used engine and it is doing ...
1 answer • 1999 Hyundai Elantra • 110,000 miles
1988 Chevrolet Astro Van mileage: 247,000. It's time to replace the engine in my 1988 Astro. I bought a 4.3 V6 that has come out of a 1991 S-10. When I dismantled it to get it ready to ...
1 answer • 1988 Chevrolet Astro • 247,000 miles
1990 Toyota Camry mileage: 150,000. 1. The oil warning light is on. 2. There are four quarts of oil in the car. 3. The oil filter is dry. 4. The engine sounds rough. 5. There is noise ...
3 answers • 1990 Toyota Camry • 150,000 miles