check that voltage is going to the starter from the seloniod in crank pos.

Answered by cadieman (expert)
2,856 answers provided

What if the voltage is going to the start to the solenoid just fine ? What then?

Response from nmccarty82
1 question asked

How do I know if it is getting what it needs? Do I have to buy a voltage tester? What are the steps I should take?

Response from nmccarty82
1 question asked

MAYBE LOOSEN THE SWITCH AND SCOOT IT BACK TOWARDS THE STEERING WHEEL?

BASICALLY PUT THE SWITCH IN THE "ON" POSITION----SCOOT THE SWITCH BACK (WITH ROD IN IT) TILL THE RADIO COMES ON!

IT MAY TAKE A LITTLE "TWEAKING" TO GET IT PERFECT

HERE'S SOME PICS OF AN '88 F-150 I DID FOR A FRIEND

I TOOK THESE PICS BECAUSE ON A JEEP CJ 5 AND 7, YOU ARE UNABLE TO DROP THE COLUMN YOU MUST DO THE WHOLE DEAL BY FEEL

I ANSWER A LOT IN THE CJ FORUMS (MY THING) AND JUST KNOWING WHAT IT REALLY LOOKS LIKE WHEN IT'S HIDDEN, MEANS A BUNCH TO SOMEONE WHO BASICALLY CHANGING ONE BLINDFOLDED AS IN A CJ

THE MEDIC

Answered by CJ MEDEVAC (expert)
6,800 answers provided

I DID MEAN ABOVE---PUT THE KEY IN THE ON POSITION SCOOT THE SWITCH 'TILL IS CORRESPONDS

THE MEDIC

Answered by CJ MEDEVAC (expert)
6,800 answers provided