SPONSORED LINKS

How do I connect the power steering pump high.

Tiny
CMANLEY3
  • MEMBER
  • 1989 CHEVROLET CELEBRITY
How do I connect the power steering pump high pressure lines after replacing the pump? Is there a manual available for this? I have a 1989 chevy celebrity wagon. I already have the pump and have replaced it.
Monday, December 31st, 2012 AT 1:24 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
You might have to replace them with teh pump loose, they just screw in make sure o-ring is in good shape.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, December 31st, 2012 AT 2:18 PM
Tiny
CMANLEY3
  • MEMBER
  • 2 POSTS
I am talking about the lines that go not into the pump, but the other end on the frame part itself. How does that hook in. Does it just screw in also?
Was this
answer
helpful?
Yes
No
Monday, December 31st, 2012 AT 3:40 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you are talking about the rack yes they screw in as well. The coolant line is held with a clamp. See pic
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Monday, December 31st, 2012 AT 3:55 PM

Please login or register to post a reply.

Related Steering Pump Replace/Remove Content

Power Steering Pump Replacement
VIDEO
Power Steering Pump Replacement
Instructional repair video
Steering Pump Replacement
GUIDE
Steering Pump Replacement
A power steering pump is driven by the engine and is designed to supply pressure via the steering fluid to the steering box or rack and pinion. This pressure is transferred...

Sponsored links