SPONSORED LINKS

1986 Mazda B2000 crankshaft/timing gear removal

Tiny
THKILROY
  • MEMBER
  • 1986 MAZDA B2000
  • 1.9L
  • 4 CYL
  • RWD
  • MANUAL
  • 150,000 MILES
How is this to be done? We've lubed it, gear puled it with a couple of different pullers. We've heated the gear and tried. Tapping it with a ball peen hammer. I've even prayed and cursed directly over it. Yelled, sang, ignored and even tried to reason with it. Nothing. Engine is removed from the truck and head is off of the block. Please, any suggestions?
Thank you very much.
Tom Kilroy
SPONSORED LINKS
Tuesday, February 3rd, 2015 AT 3:56 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Did you take the bolt out? It may have a keywat that has turned if so will need to be pressed off of cam. Gear on back side of cam is part of cam arrow points to keyway in pic
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
-1
Wednesday, February 4th, 2015 AT 6:07 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Sorry looked at wrong thing if bolt and washer are out then it may be keyway problem and need to be pressed out we have no pics of this
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Wednesday, February 4th, 2015 AT 6:11 AM

Please login or register to post a reply.

Related Camshaft Gear Replace/Remove Content

VIEW MORE

Sponsored links