SPONSORED LINKS

Why is my clutch pedal froze

Tiny
GMANP
  • MEMBER
  • 1978 INTERNATIONAL TRUCK
  • 200,000 MILES
I just replaced the clutch and pressure plate on my 1978 s-series dump truck and am unable to push in the pedal I have checked and the linkage is free I checked through the inspection plate and both the bearing and arm are fre but will not depress the plate at all am I missing something
SPONSORED LINKS
Wednesday, May 30th, 2012 AT 7:12 AM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
You need to open it back up and investigate-something is binding in there
Was this
answer
helpful?
Yes
No
Wednesday, May 30th, 2012 AT 7:37 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Check the slave cylinder pushrod to see if it is out of alignment causing the binding.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, May 30th, 2012 AT 12:40 PM

Please login or register to post a reply.

Related Transmission Clutch Pedal Content

Sponsored links