Car wont fire up?

MICHAEL BARNES

MEMBER
1966 CHRYSLER NEWPORT
69,000 MILES

I have replaced the distribitor cap, points, plugs, wires, coil, batt, alt, and vol regulator. The car runs and drives great! Always started right up. But now when I try to start it, it will only crank. It will turn over and over, but wont fire up. I have checked the wires, distr cap, points, and all my conections. But I can't figure it out? Can you help me please get my car running again?

Thanks.

MICHEAL BARNES

4 Replies

KHLOW2008

MECHANIC
41,815 POSTS

You beed to find out wht is missing, fuel or ignition sparks,

The following link should give you an idea what to look for.

If problem started after replacement of the spark plugs, ensure you have the firing order correct.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Sunday, February 19th, 2012 AT 4:44 PM

KHLOW2008

MECHANIC
41,815 POSTS

https://www.2carpros.com/articles/car-cranks-but-wont-start

Sorry, I missed out the link.

Was this

answer

helpful?

Yes

No

Sunday, February 19th, 2012 AT 4:44 PM

MICHAEL BARNES

MEMBER
2 POSTS

There is no spark coming from the plug wire when I checked it with a test light. And my fuses look good? So what do I need to do next?

Was this

answer

helpful?

Yes

No

Monday, February 20th, 2012 AT 10:22 PM

KHLOW2008

MECHANIC
41,815 POSTS

For such an old engine, we do not have any information in our database so I do not know the system used.

Since there are no sparks, you need to check the points again. Ensure you have battery voltage at the distributor.

Was this

answer

helpful?

Yes

No

Tuesday, February 21st, 2012 AT 12:36 PM