What is the easiest way to wire a aftermarket two wire neutral safety switch on a street rod

Tiny
1ROBERT
  • MEMBER
  • 1959 INTERNATIONAL TRUCK
  • 70,000 MILES
Three fifty turbo in a international truck
Sunday, November 27th, 2011 AT 2:45 AM

1 Reply

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
A 350-Turbo is an automatic. It has a Park safety switch. This switch is normally inside the transmission on newer models. If not, you have one of the older models from when I was a hot rodding kid.
I would mount a limit switch somewhere, so that the circuit is opened if the transmission is not in Park. Then route the starter solenoid wiring to this limit switch and from the switch to the solenoid.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, November 27th, 2011 AT 6:19 AM

Please login or register to post a reply.

Related Transmission Gear Position Sensor Content

Neutral Safety Switch Test
GUIDE
Neutral Safety Switch Test
The functionality of the neutral safety switch has changed greatly through the automotive development era, what was once a simple switch for the reverse lights and starter...

Sponsored links