Mazda b2600 Questions
- 1991 Mazda b2600 Engine Problem with 226000 miles
- Replaced coil and plugs and cap and rotor it is running now sputters and backfires
- Asked by nielsonaj about 1 year ago - 1 Answer
- 1997 Mazda b2600 Drivetrain Problem
- I have just replaced the slave cylinder and now the clutch the pivot fork won't pressure back on the slave cylinder pin
- Asked by rob rowles about 1 year ago - 2 Answers
- 1991 Mazda b2600 Engine Problem with 306 miles
- I am trying to repair this truck for a friend, and I cannot find what is causing it to run on 2 cylinders. The person he bought it from had ...
- Asked by Darius Irwin about 1 year ago - 3 Answers
- 1992 Mazda b2600 Engine Problem with 190000 miles
- Oil light on instrument panel does not work. It is not the bulb as I have changed it out.
- Asked by wohftb about 1 year ago - 1 Answer
- 1992 Mazda b2600 Repair Problem
- The cv axel wont come off. Having a hard time.
- Asked by Tgunsak about 1 year ago - 4 Answers
- 1989 Mazda b2600 Engine Problem with 144000 miles
- 1989 b2600i 4x4 manual trans. If it starts, will run fine for a few min then dies. No spark at coil. See prev question and answers from...
- Asked by jaxxxon about 1 year ago - 2 Answers
- 1987 Mazda b2600 Engine Problem
- I already described it in the question
- Asked by sparky1234 about 1 year ago - 4 Answers
- 1991 Mazda b2600 Repair Problem with 246000 miles
- I have removed the valve cover, but now i dont know what the next steps are to remove and replace the 2 worn out hydrolic valve lifters. ...
- Asked by tebo82 about 1 year ago - 1 Answer
- 1992 Mazda b2600 Electrical Problem with 160000 miles
- Motor will start after sitting for 40 minutes but will sputter and die afterwards. Checked fuel pressure reads within spec. Injectors are ...
- Asked by Invicta51 about 1 year ago - 0 Answers
- 1989 Mazda b2600 Engine Problem with 14500 miles
- It will run 10-15 min just fine, then will die and won't start up again for some time. Appears to hav no spark afterward.
- Asked by jaxxxon about 1 year ago - 19 Answers
- 1990 Mazda b2600 Electrical Problem
- The coil has 2 wires going to it,with the coil unpluged and key on one reeds 12v,the other reeds 0v with it pluged up both reed 12v,is this ...
- Asked by death1110 about 1 year ago - 0 Answers
- 1992 Mazda b2600 problem with 120000 miles
- Bota embrague al arranque
- Asked by servihielo about 1 year ago - 0 Answers
- 1991 Mazda b2600 Electrical Problem with 108000 miles
- I want toscan for computer error codes
- Asked by billmill5050 about 1 year ago - 4 Answers
- 1991 Mazda b2600 Drivetrain Problem with 125000 miles
- I was asked befor when i made a donation about myshirt size wich is 4xxxx ok? well heres my question my od kicks on and off while driving ...
- Asked by onemanarmy41 about 1 year ago - 0 Answers
- 1991 Mazda b2600 Drivetrain Problem with 125000 miles
- Od kicks on and off while driving specially when i let off the gas pedal
- Asked by onemanarmy41 about 1 year ago - 0 Answers
- 1999 Mazda b2600 Repair Problem with 45000 miles
- Radiator hose broke and the engine wakened. The mechanical indicated that he had to change the packing of the butt and sanding the stock, ...
- Asked by zaloflo about 1 year ago - 0 Answers
- 2005 Mazda b2600 problem with 90000 miles
- I have a Mazda Bravo (B2600) 2.6 petrol. When I push in the clutch to up change through the gears, it takes an abnormally long time for the ...
- Asked by harryup about 1 year ago - 0 Answers
- 1990 Mazda b2600 Drivetrain Problem with 265000 miles
- Changed with new. Went to start and would run on 2 cylinders. Since then have replaced Plugs cap rotor, computer (Had a bad repair job on it...
- Asked by jdikin about 1 year ago - 1 Answer
- 1990 Mazda b2600 problem with 84000 miles
- I hooked up a cable and got the diagnostic code for my truck and it says "G signal,Dual cylinder injection" for code 03 - can you please ...
- Asked by 1989fxrs about 1 year ago - 0 Answers
- 1992 Mazda b2600 Engine Problem with 270000 miles
- My wife has a Mazda b2600i 4x4. The truck will run for 10-15 min and then quit. Will not start again until it sits for 10 min or more. ...
- Asked by JimE about 1 year ago - 3 Answers
- 1990 Mazda b2600 problem with 800 miles
- I have a 1990 Mazda B2600I, I just put a rebuilt engine in it. It has about 800 miles on the vehicle. My problem is, it will not crank in ...
- Asked by bandpsales about 1 year ago - 0 Answers
- 1987 Mazda b2600 Engine Problem with 100000 miles
- Working to get it running. Bought it not running.
- Asked by Doedenone about 1 year ago - 0 Answers
- 1992 Mazda b2600 problem with 200 miles
- Where is the neutral safety switch located on the 92 mazda b2600i pickup?
- Asked by realtexmex about 1 year ago - 0 Answers
- 1989 Mazda b2600 problem with 160 miles
- Fuse location for wiper motor 1989 Mazda B2600i
- Asked by carbonterry about 1 year ago - 2 Answers
- 1990 Mazda b2600 problem with 210000 miles
- 1990 mazda 2600i 4x4 auto trans will shift fine when cold then after 4 to 5 miles drops to 4th then 3rd and wont shift back to 4th or od ...
- Asked by jtisback11 about 1 year ago - 0 Answers
- 1991 Mazda b2600 problem with 215 miles
- I have no spark. I was checking fuses and relays for another problem and when I was done the truck would not start, the truck was running ...
- Asked by chad03131972 about 1 year ago - 0 Answers
- 1991 Mazda b2600 problem with 215 miles
- I have a 1991 Mazda b2600 SE-5. My headlight brights don't work nor does the brights indicator on the dash. If I pull the dimmer switch ...
- Asked by chad03131972 about 1 year ago - 8 Answers
- 2001 Mazda b2600 problem with 185000 miles
- Just wondering about weather my 2001 model b2600 petrol has tappits or hydraulic lifters As they are rattling and about the white smoke it's...
- Asked by Pickle about 1 year ago - 2 Answers
- 1989 Mazda b2600 problem with 160 miles
- 89 Mazda B2600i Fire into the distributor but none out. Replaced cap, rotor and ignition control mod.
- Asked by carbonterry about 2 years ago - 0 Answers
- 1991 Mazda b2600 problem
- I have a 1991 mazda B2600 pickup.i rebuilt the engine from scratch.timing,compression-good.ignition system(coil,ign. mod.,pick up coil) all ...
- Asked by bryan 007 about 2 years ago - 2 Answers
- 1996 Mazda b2600 problem
- What is theFiring order for a mazda b2600?
- Asked by ninoo28 about 2 years ago - 0 Answers
- 1993 Mazda b2600 problem with 220000 miles
- 1993 Mazda B2600 manual transmission, engine burn lean ...
- Asked by Lisa Diane Pitts-Coston about 2 years ago - 0 Answers
- 1992 Mazda b2600 problem with 190000 miles
- Truck starts runs but when gas pedal is stepped on does not allways want to rev up if you step on it then let off and step on it again will...
- Asked by wildwgm54 about 2 years ago - 0 Answers
- 1992 Mazda b2600 problem with 140000 miles
- My clutch petal is sticking to floorboard it started yesterday I bled the lines by pumping the pedal and it worked most of the day today but...
- Asked by rayzorray1 about 2 years ago - 0 Answers
- 1993 Mazda b2600 problem with 117448 miles
- I have a 93 Mazda B2600i 4*4 ext cab with a 2.8 l engine, it has started burning antifreeze but oil is clean and no bubbles in rad. can the ...
- Asked by Troy Germer about 2 years ago - 0 Answers
- 1996 Mazda b2600 problem
- 1996 Mazda B2600 trouble changing headlight bulb is there a trick?
- Asked by kaz044 about 2 years ago - 0 Answers
- 1992 Mazda b2600 problem with 140000 miles
- Recently my passenger side windshield wiper stopped sweeping across my windshield and started sweeping across the hood of my truck instead! ...
- Asked by CherylJ about 2 years ago - 0 Answers
- 1990 Mazda b2600 problem
- 1990 Mazda B2600, How do you seperate the Front rotor from the hib assembly?
- Asked by lbarkley about 2 years ago - 0 Answers
- 1987 Mazda b2600 problem with 150000 miles
- I replace the oil pump, left everything time at 1, now i can't get spark, coil is good, have new cap & rotor, got power to coil & ...
- Asked by sacto about 2 years ago - 0 Answers
- 1993 Mazda b2600 problem with 210000 miles
- Have a 93 b2600 ute, have a miss that comes into it when warms up. Have done fuel filt, splugs, injectors, new dist,a/f sensor, fresh fuel...
- Asked by Zsar137 about 2 years ago - 0 Answers
- 1989 Mazda b2600 problem
- No turn signal
- Asked by fordboy18 about 2 years ago - 4 Answers
- 1992 Mazda b2600 problem with 257000 miles
- But it has over heat two weeks ago and that's when its starting doing it
- Asked by canovanas about 2 years ago - 0 Answers
- 1992 Mazda b2600 problem with 257000 miles
- White smoke then turn in black smoke mazda b2600 1992
- Asked by canovanas about 2 years ago - 0 Answers
- 1990 Mazda b2600 problem
- My ute has no oil pressure i have removed the ballance shaft chain would that hav anything to do with not having oil pressure
- Asked by darrentex about 2 years ago - 10 Answers
- 1991 Mazda b2600 problem with 77000 miles
- My pickup has been running perfectly for a week after installation of a new heater core and heater control. When started today (cold, 20F ...
- Asked by Farrel Lytle about 2 years ago - 0 Answers
- 1987 Mazda b2600 problem
- How is the timing set when replacing timing belt on an '87 Mazda B2600i?
- Asked by elgamberr about 2 years ago - 0 Answers
- 1987 Mazda b2600 problem
- What would cause
- Asked by doug seitz about 2 years ago - 0 Answers
- 1991 Mazda b2600 problem
- Cylinders # 2 and # 4 injecting too much fuel fowling the plugs. Smale fuel out the exhaust.
- Asked by Glen Spicer about 2 years ago - 0 Answers
- 1989 Mazda b2600 problem
- Im looking for a heater core diagram for a 1989 mazda b2600
- Asked by harleyman79 about 2 years ago - 0 Answers
- 1990 Mazda b2600 problem
- Is my balance shaft chain nessary to the working of my ute can i remove it and if i do will it cause any problems in the future
- Asked by darrentex about 2 years ago - 0 Answers