Mazda b2600 Questions
- 1991 Mazda b2600 Engine Problem with 375000 miles
- The truck has a bit of a starting problem, the head gasket was replaced recently, the air intake sensor dosnt seem to work, but works when ...
- Asked by trist about 3 days ago - 1 Answer
- 1992 Mazda b2600 Electrical Problem with 225000 miles
- Truck runs good for a while then quits but will start back after a few minutes. It seems to act up quicker if I open it up from a standstill...
- Asked by byran about 8 days ago - 1 Answer
- 1992 Mazda b2600 Electrical Problem with 225000 miles
- This truck runs great but after a few miles, (maybe 20 miles) the Hold light starts flashing and the engine dies. After awhile it starts ...
- Asked by byran about 9 days ago - 1 Answer
- 1988 Mazda b2600 Drivetrain Problem with 99000 miles
- My 1988 Mazda B2600, 4WD has a manual transmission. When I engage the clutch pedal, I get a grinding of the gears when starting the truck ...
- Asked by jah180 about 1 month ago - 1 Answer
- 1993 Mazda b2600 Drivetrain Problem with 200000 miles
- I have a 1992 Mazda 4by4 pickup b2600i 5 speed. The rearend started making a clunking noise but only when I shift down 3-1 , or when I'm ...
- Asked by Kazi about 1 month ago - 1 Answer
- 1991 Mazda b2600 Electrical Problem with 215000 miles
- Need wireing color code for 4 wires on distribator
- Asked by (pending member) about 1 month ago - 1 Answer
- 1993 Mazda b2600 Engine Problem with 218000 miles
- Will not start. Get fire to cap. Get fuel past fuels filter
- Asked by (pending member) about 2 months ago - 1 Answer
- 1997 Mazda b2600 Brakes Problem
- I need to know where the brake switch is for the tail lights. Can't seem to find it.
- Asked by (pending member) about 2 months ago - 1 Answer
- 1992 Mazda b2600 with 100000 miles
- How do you replace the ignition switch with a broken key in it
- Asked by (pending member) about 2 months ago - 1 Answer
- 1996 Mazda b2600 Electrical Problem with 166789 miles
- Where is the obd port located.
- Asked by (pending member) about 2 months ago - 1 Answer
- 1993 Mazda b2600 with 150000 miles
- Truck will only start and run while the gas tank is completely full.After the top gallon or so is used it stops running and will not start ...
- Asked by (pending member) about 2 months ago - 1 Answer
- 2003 Mazda b2600 with 179000 miles
- On the distributor what is the cylinder order
- Asked by (pending member) about 2 months ago - 0 Answers
- 1993 Mazda b2600 Engine Problem with 155978 miles
- Truck will not start its getting spark and is getting fuel to the filter but truck does not start.
- Asked by (pending member) about 3 months ago - 0 Answers
- 1993 Mazda b2600 Engine Problem with 154 miles
- Trucks starts and runs for a few minutes with no problem. After a few minutes it will sputter and die and if you try to drive anywhere it ...
- Asked by (pending member) about 3 months ago - 1 Answer
- 1991 Mazda b2600 Engine Problem with 100000 miles
- How to take out the 2.6L 4 cylinder engine? 4x4 and fuel injected.
- Asked by (pending member) about 3 months ago - 1 Answer
- 1992 Mazda b2600 Repair Problem
- I need to replace the alternator belt, but, i have to take off the power steering belt in front of it. i have tried the tension pulley but ...
- Asked by marinemoron about 3 months ago - 1 Answer
- 1991 Mazda b2600 Electrical Problem with 180000 miles
- My Mazda b2600 tail and brake lights don't work but head lights do?
- Asked by (pending member) about 3 months ago - 0 Answers
- 1993 Mazda b2600 with 120000 miles
- Truck starts then dies when you turn on lights. then there"s a clocking sound and will not start till it stops.
- Asked by mowin4dodge about 3 months ago - 0 Answers
- 1991 Mazda b2600 Electrical Problem with 20000 miles
- I have headlights and taillights but no panel/dash lights does this have a fuse for these lights separate
- Asked by randygilmore about 3 months ago - 0 Answers
- 1991 Mazda b2600 Heater Problem with 178000 miles
- My heater does not work. I turn can turn the knob all the way to three and no heat or air comes out. But when im driving heat comes out the...
- Asked by mikecham about 3 months ago - 1 Answer
- 1992 Mazda b2600 with 200 miles
- Is it possible the torque convertor needs to be replaced if it feels like its slipping
- Asked by (pending member) about 3 months ago - 1 Answer
- 1993 Mazda b2600 Engine Problem with 328987 miles
- How do i clean the idle control
- Asked by (pending member) about 3 months ago - 1 Answer
- 1992 Mazda b2600
- Front diff. pinion bearings are out how do i get diff apart
- Asked by (pending member) about 3 months ago - 1 Answer
- 1990 Mazda b2600 Repair Problem with 190000 miles
- How to remove the starter on a 1990 Mazda 4x4 2600i pickup Tried & could not figure how to get to starter it appears impossible unless ...
- Asked by (pending member) about 4 months ago - 0 Answers
- 1991 Mazda b2600 Engine Problem with 200000 miles
- The truck will sometimes crank and run fine for a few minutes then it acts like it doesn't have much power when you accelerate it is really ...
- Asked by Chawkins38901 about 4 months ago - 2 Answers
- 1992 Mazda b2600 Engine Problem with 170000 miles
- The truck runs fine. Can drive it where ever and runs great but once you cut it off it will not crank back up
- Asked by Chawkins38901 about 4 months ago - 1 Answer
- 1991 Mazda b2600 Electrical Problem with 264000 miles
- I changed my alternator and the truck started,then tried to start it again and it won't start.
- Asked by (pending member) about 4 months ago - 1 Answer
- 2001 Mazda b2600 with 243000 miles
- Where is the fuel filter located on a 2001 Mazda b2600 Petrol twincab Thanks i cant see it anywhere
- Asked by (pending member) about 4 months ago - 1 Answer
- 1991 Mazda b2600 Engine Problem with 17550 miles
- 1991 Mazda Truck, 2.6 liter. 2 WD, B2600 series. Cranking but not starting until I hold the key in the start position for a minute or so...
- Asked by (pending member) about 4 months ago - 1 Answer
- 1988 Mazda b2600 Engine Problem with 350000 miles
- Vehicle is running on Autogas, backfires through inlet manifold and explodes air inlet filter box assembly. Only happens occasionaly, gas ...
- Asked by (pending member) about 5 months ago - 1 Answer
- 1991 Mazda b2600 Engine Problem with 243000 miles
- Hi there my trucks engine seems to be running rough and also lacking in power when accelerating.....it also backfires from time to time... I...
- Asked by Jason1789 about 5 months ago - 1 Answer
- 1991 Mazda b2600 Engine Problem with 243000 miles
- Hi there it seems that the engine is running rough and has a loss of power when accelerating...also blue exhaust coming out the pipe...the ...
- Asked by Jason1789 about 5 months ago - 1 Answer
- 1992 Mazda b2600 Repair Problem with 175000 miles
- Hi, My truck will not engage in 4WD. I can shift it into 4WD, but It makes a HORRIBLE clinking sound and doesn't want to move. I've been ...
- Asked by (pending member) about 5 months ago - 0 Answers
- 1993 Mazda b2600 Engine Problem with 70000 miles
- The truck was repaired at a garage and they replaced number 3 & 4 injectors repaired a broken wire and the ECU was replaced. The truck ...
- Asked by butch 62 about 5 months ago - 0 Answers
- 1997 Mazda b2600 Engine Problem with 55000 miles
- Hi I have a b2600 and it does the following thing it goes great, but I believe it has an electrical failure, when I push the gas all the way...
- Asked by (pending member) about 5 months ago - 1 Answer
- 1999 Mazda b2600 Engine Problem with 332000 miles
- I have a 1999 b2600 that keeps coughing and splattering. I have replaced the spark plugs , leads, dizzy cap, O2 sensor & put a second ...
- Asked by jarad19 about 5 months ago - 3 Answers
- 1991 Mazda b2600 Electrical Problem with 223000 miles
- Where is headlight relay ?
- Asked by (pending member) about 5 months ago - 1 Answer
- 1992 Mazda b2600 Engine Problem with 165000 miles
- 2.6 Mazda engine runs for 55 seconds then stops
- Asked by (pending member) about 5 months ago - 1 Answer
- 1993 Mazda b2600 Drivetrain Problem with 12000 miles
- Will a 1990 Isuzu pickup rear axle fit a Mazda 2600 1993?
- Asked by (pending member) about 6 months ago - 1 Answer
- 1987 Mazda b2600 with 15900 miles
- I took down the trans and replace the clucth and the pilot bearing and pressure plat and the pedal sit real low
- Asked by mike sensor about 6 months ago - 1 Answer
- 1993 Mazda b2600 with 140000 miles
- Am looking to replace my recently totalled '88 B2200 Mazda with a '92 or '93 B2200 or B2600. My 88 had a timing belt that needed replacing ...
- Asked by (pending member) about 6 months ago - 1 Answer
- 1993 Mazda b2600 Engine Problem with 200000 miles
- I have a 93 Mazada pickup truck and it will not turn over. When I turn the ignition on, I get a ticking sound from my gas tank. I have ...
- Asked by (pending member) about 6 months ago - 1 Answer
- 1993 Mazda b2600 Engine Problem with 200000 miles
- My truck will not turn over when i turn the ignition on i get a ticking sound from my gas tank i have replaced the pump and tank but still ...
- Asked by (pending member) about 6 months ago - 1 Answer
- 1990 Mazda b2600 with 15000 miles
- I have a 1990 mazda 4by4 truck sometimes i can drive for miles and runs fine.then i can crank it again and it runs like its on its last leg...
- Asked by (pending member) about 6 months ago - 1 Answer
- 1991 Mazda b2600 Drivetrain Problem with 190000 miles
- Sometimes it sticks in gear with the clutch in/hard to pull it out of gear /clutch feels soft
- Asked by (pending member) about 7 months ago - 1 Answer
- 1991 Mazda b2600 with 175000 miles
- CANT GET WATER FOR WASHER ON TO WINDSHIELD
- Asked by (pending member) about 7 months ago - 1 Answer
- 1992 Mazda b2600 with 87000 miles
- I have a 5 speed trans and when going down the road it comes out of 2 wheel . i have to stop and put it back into gear it dosent seem like ...
- Asked by (pending member) about 7 months ago - 1 Answer
- 1990 Mazda b2600 Engine Problem with 120000 miles
- Sounds weird
- Asked by nathan59 about 7 months ago - 1 Answer
- 1990 Mazda b2600 Engine Problem with 120000 miles
- I have a 1990 mazda b2600 i got new wires, spark plugs, and cap and rotor. but when i start it it sounds like it has no power. can yall tell...
- Asked by nathan59 about 8 months ago - 1 Answer
- 1992 Mazda b2600 Engine Problem with 280000 miles
- After a fast idle would clear up Replace all 4 injectors now have no fire on 2 and 4 inj. wires. Will start,takes a hold lot of cranking....
- Asked by LMC55 about 8 months ago - 1 Answer