Free Automotive Repair Advice by Certified ASE Technicians
How To Repair / Power
Windows-1 / Power
Windows-2/ Power
Windows-3 / Power
Windows-4
Electric Power Windows (continued)
Step 4 of 11. Removing door panel mounting bolts
Locate and remove all door panel mounting bolts and/or screws. Some door
panels use plastic push style fasteners. After all door panel fasteners
have been removed gently pull up and/or out on the panel and remove it. Remove
all electrical connectors to fully separate the panel from the door.
Step 5 of 11. Remove plastic insulator
Most car doors have a weather and sound insulator which when pulled back, will expose the inner
workings of the door. In this photo you can see the door lock manual control
rod.
Step 6 of 11. Release window motor electrical connector and identify
components
Prepare for electrical circuit test. Release the safety clip and remove
electrical connector.
Car Door Electrical Parts
|
Purchase
Power Door Locks - The electric door lock is operated by the
control switches in the drivers side or passenger side compartment. |
|
Purchase
Power Window Motor - Power window motors can move the
window up and down. Electric window motors are a normal service item. |
Common Problems
1. Window motor shorts out and stops working or works very slowly.
2. Window control switch short circuits due to excessive amperage draw.Also see:
Additional "How to" Car Repair or Services
1.How to Replace Air Filter
2.How to Change a Cabin filter
3.How to Change Oil and Filter
4.How to Tune Up with Throttle Bore Service
5.How to Replace a Radiator
6.How to Replace Fuel Filter
7.How to Read Trouble Codes
8.How Filters Work
9.How to Replace Front Brake Pads
10.How to Replace Rear Brake Pads
ASK A CAR REPAIR QUESTION
GET AN ONLINE REPAIR MANUAL
FOR YOUR CAR - Get instant access to your vehicles drive belt routing, wiring diagrams, trouble code information and other available updates and
factory bulletins.
| 
