Ok here's the thing my friend has a 83 dodge d150 with a 79 Cordoba 360 in it. it leaked lots of oil outta the manifold and valve covers so we replaced the gaskets. Ran lots better that day, it sat for a week then we started it again and it ran terrible. we messed with the distrubitor cap a little and it got better so we replaced cap rotor plugs and wires. NOW it won't start at all we have gone on 2 replace the coil, ignition mod, voltage regulator, the resister, carburetor, and distributor. it hits and kicks every now and then but it's random we have a 1700 mile drive we have 2 make in 1 week and we are almost outta ideas any help of ideas would be welcome
truck is 83 dodge d-150
engine 79 cordoba 360 with a 2bbl carb 60,000 miles on rebuild