Brakes problem
2006 Acura RSX 4 cyl Front Wheel Drive Manual 55,000 miles
----------------------------------------------------------------
I am trying to replace the brake pads on my 2006 RSX type S and for some reason the usual caliper bolts you undo to take off the caliper just keep spinning. It looks like there's an inner bolt that may need to be kept in place while the outside bolt is spun loose, but Im not sure....help?

you are talking about the sliding pins on the caliper right?
just use a wrench.look for a flat plate at the side of the pins,next to the rubber sleeve.you should notice it spinning with the pin's bolts when you turn.use the wrench to hold it and stop it from spinning. 17mm or 19mm- you didn't say front or rear