2004 Dodge Intrepid I NEED HELP

jaron@carpro · Posted at Tue Nov 03, 2009 7:33 pm

Engine Mechanical problem
2004 Dodge Intrepid Front Wheel Drive Automatic 50,000 miles

I CANT FIND MY CAM SENSOR WHERE SHOULD I LOOK

ch112063 · Posted at Tue Nov 03, 2009 10:55 pm

On both a 3.5L or 2.7L they sense a sprocket on the camshaft of the top part of the cylinder head. They mount on the cylinder head near the front part of the engine. A 10mm bolt holds it on. It has a wire connector. The cylinder heads are covered by covers called valve covers. The code you have is for a camsensor signal lost or not worhing right? Top of engine, usually left front. ok If the timing belt is broken or out of time, you will also get this code sometimes, the engine won't start or it will run terribly.

jaron@carpro · Posted at Thu Nov 05, 2009 9:53 pm

OK ILL LOOK AT THAT THANKS ALOT FOR YOUR HELP MAN YOUR THE EXPERT NOT ME

ch112063 · Posted at Fri Nov 06, 2009 4:19 pm

Oh anytime. On any V type engine configuration The camshaft is usually through the middle front to back. Usually front. On overjhead cam it is usually left side. Persevere. Anytime. Do not let yourself get hurt. And after a good rest things get better, and you will get it.
Now Mitsubishi would have overhead cams and place it on left cam because it was closest to the lower drive sprocket and more direct. They have great manuals available and repair steps also.