by any chance,did you lubricate the brake pad edges(ears) before putting it on the bracket?cliclking noise could be from the brake pads shifting up or down on the bracket. drive the car forward and reverse for a few feet a couple of times,check if you can hear the same noise.
screeching noise could be from a dust shield making contact with the rotor.just push the metal plate back,away from the rotor and see if it helps.
as far as the rubbing goes,i guess you could just take a look at the fenderwell lining and make sure its in place.other than that, you may have bent parts or could use an alignment.how does the tire wear? it should give you a good idea on the rubbing