Engine Performance problem
2000 Ford F150 V8 Four Wheel Drive Automatic

I have a F150 year 2000 the engine light came on and code is P0301 Cylinder 1 misfire detected . So I'am not sure what to do because 2 months ago I just put in new spark plugs and truck was working fine before engine light came on the light came on 2 says ago.

is the car running ok ? .. if so have a good autoparts store delete the code from memory .. test drive the vehicle ... see if the code returns ... if it does repost for more info .... sensors pick up on misfire's for numerous reasons ... this could be just a glitch ?

Dave H wrote:

is the car running ok ? .. if so have a good autoparts store delete the code from memory .. test drive the vehicle ... see if the code returns ... if it does repost for more info .... sensors pick up on misfire's for numerous reasons ... this could be just a glitch ?

the truck is not runing good

could you tell me which coil system you have ?? 8 plug leads running back to 2 coil packs ... or 8 coil on plug system ... if it's COP (coil on plug) .. try replacing #1 coil

this is a coil on plug

yes it's 8 coil on plu system

replace coil #1 ... i generally advise to replace all coils at the same time .. as they tend to breakdown in sequence .. but for now let's replace #1 to make sure this is the fault ?

Dave H wrote:

replace coil #1 ... i generally advise to replace all coils at the same time .. as they tend to breakdown in sequence .. but for now let's replace #1 to make sure this is the fault ?

Yes I replace coil #1 and this morning the light came on I went to the auto store and check the engine light and 5 differents codes came up they are po136, po156, p1131, p1151, p0300 . Can you please him me I don't know what to do.

Mayo1 wrote:

Dave H wrote: replace coil #1 ... i generally advise to replace all coils at the same time .. as they tend to breakdown in sequence .. but for now let's replace #1 to make sure this is the fault ? Yes I replace coil #1 and this morning the light came on I went to the auto store and check the engine light and 5 differents codes came up they are po136, po156, p1131, p1151, p0300 . Can you please him me I don't know what to do.

Hi Dave, I have not heard from you I, can you please give any ideas on whats wrong with me truck.

sorry not got back to you sooner .. is the engine running fine again now .. and the codes are just showing up ...

Dave H wrote:

sorry not got back to you sooner .. is the engine running fine again now .. and the codes are just showing up ...

the truck is not working fine