Welcome to our question and answer forum. Our
Technicians and members answer over 10,000 free and
donated auto repair questions every month. Asking a
question is free of charge, just sign up to our forum.
However if you elect to donate a small sum we will
guarantee an answer from one of our 2Carpros.com
certified technicians. Due to the nature of car repair
problems it sometimes requires some dialog between our
technicians and you to get your problem solved. 100% of
the donation is awarded to the technicians helping you,
questions with donations are answered as promptly as
possible . If you are unsatisfied with our answer we
will gladly return your donation.
Engine Performance problem
1997 Ford Mustang 6 cyl Two Wheel Drive Automatic 99000 miles
I flushed the motor twice, changed the intake gasket and still there is not enough oil pressure to the top of the motor, I took the oil pressure sending unit off and pressure checked and the bottom of the motor is 90 psi, what could this be???
Is there lifter noise? What is the reason you think oil P low ? The oil get's there via lifter through push rod and onto rocker. Is no oil getting to rockers?
Is there lifter noise? What is the reason you think oil P low ? The oil get's there via lifter through push rod and onto rocker. Is no oil getting to rockers?
yes ther is lifter noise from all the lifters, the psi from the lower part of the motor is 90 psi, also the rods seem to be fine, all the noise is from the lifters and it seem like the oil is barely seeping from the lifters and I never seen all lifters rattling at once.
It maybe loosing preassure at the camshaft bearings. If really worn oil will drop back in block instead of oil galley for lifters. One or two lifters noisy because of gunked up I could see but not all and both oil gallies pluged not likely.
Find a repair manual
for your car - Get instant access to your
vehicles drive belt routing, wiring diagrams,
trouble code information and other available
updates and factory bulletins. Click
here to find out more.